ALPINE S-W10D2 10 1800 Watt Car Audio DVC Subwoofer+Vented Sub Box Enclosure For Sale
Description
Package Includes:
- (1) Alpine 10 Car Audio Subwoofer
- (1) Rockville Single 10 Vented Ported Subwoofer Sub Box Enclosure 1.4 cu ft
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
-
- ALPINE S-W10D2 10 1800 Watt Car Audio Subwoofer DVC Dual 2-Ohm Sub
- Speaker Rating:
- Max RMS Power Capacity: 600W RMS
- Peak Power Capacity: 1800W Peak Power
- 10” 2O+2O Subwoofer
- High Strength Custom Steel Frame
- Great complement to V-Power Amplifiers
- Frequency Response: 28Hz – 200Hz
- Mounting Depth 4-11 16”
- Cutout diameter: 8-13 16
- Recommended Sealed Box: 0.58 cubic foot (gross volume)
- Recommended Vented Box: 1.30 cubic foot (gross volume), 10” x 1” vent area, 17” vent length
- Rockville RQB10 Single 10 Vented Ported Subwoofer Sub Box Enclosure 1.4 cu ft
- Single 10 Side Ported
- Finished with Durable Bed Liner
- 3 4 MDF
- High Quality Spring Loaded Terminal
- Air Space: 1.4 Cubic Feet
- Tuning Freq- 39Hz
- Mounting Depth: 8
- Height: 11
- Width: 20
- Depth: 14
- Cutout diameter: 9.185
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
-
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
Complete Single Subwoofer Enclosure Installation Kit!
Includes:
Features of RQB10:
Description of S-W10D2:
The S-Series subwoofers are designed with increased bass output and
installation versatilityVERSATILE APPLICATIONS
Along with the new 8” woofer, the 10” and 12” S-Series subwoofers have been
re-designed from the ground up. The mounting depth of the 10” and 12” subwoofers
are almost 1” more shallow than previous models at just over 4.5” for the 10”
models and just over 5” for the 12” models, allowing them to fit into a wide
variety of installation applications.600W POWER HANDLING
The 10” and 12” S-Series subwoofers are engineered with an improved voice coil
allowing the woofer to benefit from an increased power rating of 600 watts.
Match them with the powerful VPower MRV-M500 mono amplifier for a great
subwoofer system.CUSTOM-STAMPED STEEL FRAME
Each S-Series subwoofer uses a custom-stamped steel frame. These high-strength
frames were designed to withstand the rigors of the improved S-Series motor.
They have frame leg vents as well as a vented back plate to help cool the
subwoofer voice coil and motor parts, plus a shallow design to help fit in
smaller spaces.PUSH-TYPE INSERT TERMINALS WITH DUAL VOICE COIL JUMPER SYSTEM
The push-type insert terminals help reduce the installation time of the S-Series
subwoofers. Just strip the speaker insulation at the wire end, then insert the
bare wire into the hole of the spring-loaded push terminal.STRONTIUM FERRITE DOUBLE-STACKED MAGNETS
The S-Series subwoofers use two strontium ferrite magnets stacked together, for
increased motor strength and excursion which ultimately leads to more bass
output.CLEAN, CONCEALED MOUNT GASKET SYSTEM
The S-Series subwoofers have concealed mount gaskets, creating a clean, finished
appearance for any vehicle.OPTIONAL GRILLES
All S-Series subwoofers are compatible with optional grilles (sold separately)
to provide added protection to the cone. The grilles feature a mesh design with
a S-Series logo badge. KTE-10G.2: For 10” S-Series SubwoofersSpecifications:
- ALPINE S-W10D2 10 1800 Watt Car Audio Subwoofer DVC Dual 2-Ohm Sub
Additional Information
| Title | Default Title |
|---|
