-70%

(2) Presonus Eris Pro 6 Powered 6 Studio Monitors+Stands+Pads+10 Subwoofer Discount

Original price was: $1,000.82.Current price is: $300.25.
0 reviews
23 people are viewing this right now
Estimated Delivery:
14 - 21 Mar, 2025
Trust Badge
Guaranteed safe & secure checkout

Description

Package Includes:

  • (2) Presonus Eris Pro 6 Powered 6 Coaxial 2-Way Powered Studio Monitor Speaker
  • (1) Presonus Eris Pro Sub 10 Active 10 Studio Subwoofer Powered Sub
  • (1) Rockville RVSM5 Pair Studio Monitor Bookshelf Speaker Stands w Adjustable Height
  • (1) Pair Rockville RRS190S Foam Studio Monitor Isolation Pads 7.5 x 9.5 3 Angles
  • (2) Rockville RCTR110B 10 1 4 TRS to 1 4 TRS Cable, Black, 100% Copper

    • Description of Eris Pro 6:

      The Eris Pro 6 reference monitors employ a single point-source coaxial design for clear and accurate sound reproduction. This design provides superior phase alignment between components and delivers a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns – unique advantages for Dolby Atmos immersive rooms as well as stereo mix environments.


      The Eris Pro 6 also delivers finely detailed transient response, and stunning dynamics that delivers a natural and less fatiguing experience. A 1.25-inch ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 6.5-inch woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 140 Watts of power allows the Eris Pro 6 to reach down to an astonishing 35 Hz.

      Acoustic tuning controls let you configure the Eris Pro 6 for your room and three-way Acoustic Space tuning can compensate for the effects of speaker placement against a wall or in a corner.

      Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You ll have no problem hooking your Eris speakers up to virtually anything. Lastly, provisions for wall and ceiling mounts make it easy to integrate Eris Pro 6 monitors into any stereo or multi-channel system.

      Features:

      • Single point-source coaxial design for wider sweet spot and better phase alignment
      • 6.5-inch, woven-composite, low-frequency driver
      • 1.25-inch, silk-dome, high-frequency driver
      • 140W, Class AB amplification
      • 35 Hz to 20 kHz frequency response
      • 103 dB SPL (Peak, @ 1 meter)
      • Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (±6 dB, center 10 kHz, continuously variable), Mid Frequency (±6 dB, center 1 kHz, continuously variable), Low Cut (Flat, 80
      • Hz, 100 Hz @ -12 dB octave)
      • XLR and ¼-inch TRS balanced and RCA unbalanced rear-panel stereo inputs
      • Protection: RF interference, output-current limiting, over-temperature, turn-on off transient, subsonic filter
      • Power Saver mode (engages after 40 minutes)
      • Wall and ceiling mountable

        • Description of Eris Pro Sub:

          Intended for serious personal studios and professional music-production environments, the Eris Pro Sub 10 lets you take charge of the low-frequency foundation of your mix. An ideal companion to Eris® Pro and Eris Studio-series reference monitors, the Eris Pro Sub 10 compliments full-range monitors without overshadowing them and extends the reach of your full-range system’s low end with a more musical and natural approach. Extensive user controls include input gain, continuously variable lowpass filter for creating a seamless crossover transition, and a switchable highpass filter that removes content below 80 Hz from the full-range signal sent to the monitors.

          Features:

          • 10-inch, front-firing, glass-composite, low-frequency transducer
          • Front-firing, bass-reflex acoustic port
          • Continuously variable lowpass filter (50 Hz to 130 Hz) sets the upper frequency reproduced by the subwoofer
          • Switchable highpass filter removes frequency content below 80 Hz from the full-range subwoofer outputs to the main monitors
          • Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
          • Input gain control (-30 dB to +6 dB, continuously variable), polarity invert switch, and ground-lift switch
          • 170 watt (RMS), Class AB amplification for up to 113 dB SPL, with a frequency response of 20 to 200 Hz
          • Left and right, balanced XLR and ¼-inch TRS and unbalanced RCA main inputs
          • Left and right balanced XLR and ¼-inch TRS outputs and XLR subwoofer output for connecting a second Eris® Pro Sub 10

            • Includes of RVSM5:

              • 2 stands
              • 2 sets of rubber feet for hard surfaces
              • 2 sets of spikes for carpet floor
              • Adjustable speaker shelf
              • Hex key (assembly is just 2 screws)
              • Cable clips
                • Description:

                  The Rockville RVSM5 is not your ordinary speaker stand. This stand is perfect for studio monitors and bookshelf speakers. It is a best-in-class stand with all the features you want. It starts with a solid steel base that has an elegant rounded triangular shape. You can adjust the height easily with quick-access hand tightening knobs. You can also adjust the width of the speaker tray to ensure a snug fit with any speaker. The speaker tray has thick foam to eliminate unwanted vibrations.

                  We include feet for hard floors as well as carpet spikes. We also include snap-on cable clips that will allow you to neatly run your speaker cables. This steel stand is super strong with a weight capacity of 50 lbs. per speaker.

                  Features:

                  • Rockville RVSM5 Adjustable Height Studio Monitor Stand with Solid Base and Adjustable Speaker Platform
                  • Speaker stand Height adjustment: 33 to 52
                  • Speaker tray is adjustable from 5.9 to 13.4 (Fits any bookshelf style speaker up to 50 Lbs.)
                  • Speaker tray has edges and it will adjust to the width of your speaker
                  • Speaker tray has thick foam padding to reduce speaker vibrations
                  • Hand tightening knobs to adjust tray width or height
                  • Includes rubber feet for hard floors and spikes for carpet
                  • Snap-on Cable clips included to hide cables
                  • Elegant and stable design with rounded triangular base plate
                  • Solid Steal
                  • Perfect for studio monitor speakers and home speakers
                  • Load Capacity: 50 lbs. per stand

                    • Video of RRS190S:

                      Related products

presentationus.shop © 2025 All Rights Reserved

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare